Do you need a special antenna to receive HDTV OverTheAir? - ota antenna connection
I have a VHF and UHF antenna at 60 meters. Tower with a rotor on the side of my house. The reception is good for most, but I'm not sure how to get OTA HD on your HDTV. My satellite HD decoder and HD works very well with the SA with a component video connection. They do not know how to get HD via antenna. Development programs in HD, but do not get it in HD, it must be my connection method? Any help would be appreciated.
Sunday, February 14, 2010
Ota Antenna Connection Do You Need A Special Antenna To Receive HDTV OverTheAir?
Subscribe to:
Post Comments (Atom)
Most (not all channels) HD channels are UHF. They are logical with their HD receivers are concerned, their analog channels match. Meaning that your analog channel ABC 10th The HD version was 58th on channel When the receiver to decode the air High Definition and PSIP (station and digital information) program, then re-allocate channel 58 and channel 10-1. The station can also run a 24 / 7 power weather radar on channel 10-2.
ReplyDeleteAfter the court of the analog channels for a few years in the future, high-definition channels currently using UHF again go back to FM. Thus, with its rotor, UHF, VHF antenna and HDTV tuner, which are not defined only for today but for the future.
There are no specific requirements for digital satellite TV or HDTV. If the antenna is well suited for analog frequencies to the station in your area (VHF and UHF), WLL, will work for HDTV. After the switch to digital in 2009, many but not all stations broadcasting digital now back to VHF UHF.
ReplyDeleteGo here ...{:-{}.
ReplyDeleteSaturday field you need a port for the antenna. Be decrypted, the HD signals, so you have to run through the tuner, unless your TV already. You do not need a special antenna for HighDef. High-definition broadcasts and some theU UHF, VHF.
ReplyDeleteNow you need to know where the profit is larger in the antenna, their relationship back. Go online and find the address stations in your area. Usually this is done via code ... Point, it should include your locals and HD. As published in a format similar to 2 2-1 to the local high definition, etc.
Should have the power of your receiver and antenna port. In addition, the configuration of your receiver, you win the counter. You may have to adapt and antennasna, and shows the signal strength on the bar. Seems confusing, but even in the footsteps of her.
Yes, you will need an HD antenna to receive OTA HDTV signal.
ReplyDelete